HDD/SSD enclosures Aqua Computer
Here you can compare the prices for hDD/SSD enclosures Aqua Computer, get acquainted with photos and technical characteristics (for example Port multiplier, Tape drive connection, Supported data transfer rates, Drive bays size, Hard drive size, Hard disk controller) and buy a liked model hDD/SSD enclosures in one of the reliable online stores.
-
Product catalogs to browse
-
aquadrive X4 copper edition G1/4
The aquadrive X4 can be used to cool and encapsulate up to four (!) hard disk drives. The aquadrive X4 itself can be installed into three adjacent 5.25 inch drive bays and features a voluminous reservoir.
The side panels of the aquadrive X4 are made from Delrin, with two massive copper plates in direct contact to the hard disk drives. All covers are made from stainless steel, top and bottom cover are equipped with acoustic insulation. The back cover is designed for S-ATA hard disk drives, but break-out elements can easily be removed to allow installation of P-ATA drives.
An integrated fill port with sealing screw gives you a convenient way to fill and refill the reservoir when installed into a PC, using the washing bottle included in delivery. The reservoir extends into both side panels and both cavities are connected through two pipes installed behind the front cover. The reservoir also features a Plexiglas windows in the front cover with a red fill level indicator.
For installation into the PC's drive bays, four rubber decouplers are included in delivery. Additional threads can be used to install the aquadrive X4 without the rubber decouplers or as transportation locks.
Approved for hard disk drives rotating at up to 15,000 rpm.
The side panels of the aquadrive X4 are made from Delrin, with two massive copper plates in direct contact to the hard disk drives. All covers are made from stainless steel, top and bottom cover are equipped with acoustic insulation. The back cover is designed for S-ATA hard disk drives, but break-out elements can easily be removed to allow installation of P-ATA drives.
An integrated fill port with sealing screw gives you a convenient way to fill and refill the reservoir when installed into a PC, using the washing bottle included in delivery. The reservoir extends into both side panels and both cavities are connected through two pipes installed behind the front cover. The reservoir also features a Plexiglas windows in the front cover with a red fill level indicator.
For installation into the PC's drive bays, four rubber decouplers are included in delivery. Additional threads can be used to install the aquadrive X4 without the rubber decouplers or as transportation locks.
Approved for hard disk drives rotating at up to 15,000 rpm.
-
Payment Methods
We accept:
